oneConcept Beaufort Manual De Instrucciones página 41

(X) Setting
High humidity alarm: Use +/- and ON / OFF to set the humidity at
1
which an alarm sound should be emitted. When the alarm is active, a
corresponding icon is shown on the display.
Low humidity alarm: Use +/- and ON / OFF to set the minimum
2
humidity at which an alarm sound should be sounded. When the
alarm is active, a corresponding icon is shown on the display.
Display of the highest humidity measured so far (flashing). Press and
3
hold the display for 3 seconds to return to the normal display.
Display of the lowest humidity measured so far (flashing). Press and
4
hold the display for 3 seconds to return to the normal display.
(X) = The number of times the display must be tapped to access the
corresponding settings
Indoor and outdoor humidity
EN
41