Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
b ) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Additional Power Tool Safety Warnings
WARNING: Additional safety warnings for
hedge trimmers
•
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the tool can result
in serious personal injury.
•
Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer always fit the cutting device
cover. Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
•
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock.
•
The intended use is described in this instruction manual.
The use of any accessory or attachment or performance
of any operation with this tool other than those
recommended in this instruction manual can present a risk
of personal injury and/or damage to property.
•
Do not carry the tool with your hands on the front
handle, switch or the trigger switch unless the battery has
been removed.
•
If you have not used a hedge trimmer before, preferably
seek practical instruction by an experienced user in
addition to studying this manual.
•
Never touch the blades while the tool is running.
•
Never attempt to force the blades to come to a standstill.
•
Do not put the tool down until the blades have come to a
complete standstill.
•
Regularly check the blades for damage and wear. Do not
use the tool when the blades are damaged.
•
Take care to avoid hard objects (e.g. metal wire, railings)
when trimming. Should you accidentally hit any such
object, immediately switch the tool off and check for
any damage.
•
Should the tool start to vibrate abnormally, immediately
switch it off and remove the battery then check for
any damage.
•
If the tool stalls, immediately switch it off. Remove the
battery before attempting to remove any obstructions.
•
After use, place the blade sheath supplied over the blades.
Store the tool, making sure that the blade is not exposed.
•
Always ensure that all guards are fitted when using the
tool. Never attempt to use an incomplete tool or a tool with
unauthorised modifications.
•
Never allow children to use the tool.
•
Be aware of falling debris when cutting the higher sides of
a hedge.
•
Always hold the tool with both hands and by the
handles provided.
Safety of Others
•
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance.
Residual Risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc. Even with
the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks can
not be avoided. These include:
•
Injuries caused by touching any rotating/moving parts.
•
Injuries caused when changing any parts, blades
or accessories.
•
Injuries caused by prolonged use of a tool. When using any
tool for prolonged periods ensure you take regular breaks.
•
Impairment of hearing.
•
Health hazards caused by breathing dust developed
whenusing your tool (example:- working with wood,
especially oak, beech and MDF.)
SAVE THESE INSTRUCTIONS
Chargers
D
WALT chargers require no adjustment and are designed to
e
be as easy as possible to operate.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds
to the voltage on the rating plate. Also make sure that the
voltage of your charger corresponds to that of your mains.
Your D
WALT charger is double insulated in
e
accordance with EN60335; therefore no earth wire
is required.
If the supply cord is damaged, it must be replaced only by
D
WALT or an authorised service organisation.
e
EngLIsh
29
Publicidad
Tabla de contenido
