English; Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW911 Manual De Instrucciones

Ocultar thumbs Ver también para DW911:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
• Never attempt to open a battery pack for any
reason.
• Use only chargers labelled "NiMH" or "NiMH +
NiCd" to charge D
E
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
100%
Battery charging
100%
Battery charged
Problem charging or too cold
NiMH
+
Charges NiMH and NiCd battery packs
NiCd
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
Use only with D
others may burst, causing personal injury
and damage
Do not expose to water
Have defective cords replaced
immediately
+40 ˚c
+4 ˚c
Charge only between 4 °C and 40 °C
Discard the battery pack with due care
for the environment
11
WALT NiMH battery packs.
WALT battery packs,
E
Do not incinerate the battery pack
60
See technical data for charging time

Package contents

The package contains:
1 Radio/charger
1 Instruction manual
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your DW911 radio/charger accepts D
and NiMH battery packs ranging from 7.2 to 18 V.
1 Volume control
2 Mode selector
3 Station selector
4 Latch
5 Scale
6 Charging indicator (red)
7 Battery pack

Electrical safety

Make sure that the voltage of your charger
corresponds to that of your mains.
Your D
WALT charger is double
E
insulated in accordance with EN 60335;
therefore no earth wire is required.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D
WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 3 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
E N G L I S H
WALT NiCd
E
en - 2

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido