Provisión de radio doble DIN
1. Monte los soportes en el radio
con los tornillos que vienen con el
radio. (Figura A)
2. Enganche el panel de la moldura
de la carcasa del radio en el bisel
de la moldura de fábrica desde el
lado de atrás del bisel. (Figura B)
3. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections to
the new radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
4. After connecting all wiring, mount
the new radio assembly into the
dash with the factory screws and
reassemble the dash in reverse
order of disassembly.
Ensamble del kit
(Figura A)
95-7365B
(Figura B)
3