Ejemplo Ilustrado De Medición De Ecg; Solución De Problemas - VOCARE VITALS 360 Manual De Uso

07.5 Ejemplo Ilustrado de Medición ECG
07.6 Solución de Problemas
ERROR DISPLAY
The device fails to measure
heart rate
ECG waveform excursion
or strong irrelevant
waveform
Device error
CAUSE
1. The elctrodes hace NOT made good contact
with your thumbs.
2. Movement occurred when measuring
electromagnetic interference
3. Electromagnetic interference
4. The signal os too weak
1. Skin is too dry or oily
2. Electrode and thumbs are not contacted tightly
3. Your body is too tense
The battery are low
The batteries are exhausted
Device error
1. Place thumbs correctly on the electrodes
2. When measuring, please reamin calm and
avoid moving
3. Keep away from the electromagnetic source
1. Clean the skin thoroughly with soap and
water before use
2.Press the electrode with increased force
3. Relax and repat the measurement
You should use the charger to charge the device
immediately. Refer to Section 02.1
You should use the charger to charge the device
immediately. Refer to Section 02.1
Repeat measurement. If you get the same
message repeatedly please contact your local
VOCARE INC. representative or call 1-855-
986-2273 (available 9am to 5pm, Monday-
Friday)
64
REMEDY