Risco RW132XWR Instrucciones De Instalación página 6

Figure 1
Figure 3
Adding a Repeater to the Panel
1. From the panel's Installer Menu, go to Programming > Radio Devices >
Allocation > RF / Code
2. Click <OK>.
3. If by RF: Apply a long press to the repeater's front tamper switch for 5 sec.
(the back tamper is already closed); the blue repeater LED flashes to confirm
the action.
If by Code: Enter the serial number of the repeater.
4. Repeat step 3 to learn additional repeaters.
Figure 2
Figure 4
6