Technical Specifications; Ordering Information - Risco RW132XWR Instrucciones De Instalación

The results of the RSSI are between the repeater and the allocated devices. For
successful communication, the strength of the signal of the device should be
higher (by at least 7%) than the calibration value of the repeater.
NOTE: The control panel may receive signals both from the repeater and directly
from devices (does not apply to keyfobs). The control panel will ignore messages
that are received directly from devices assigned to the repeater.

5. Technical Specifications

Parameter
Voltage
Current
Battery life
Battery type
Devices supported
Maximum power output
Operations Temperature
Dimensions
Weight
Frequency

6. Ordering Information

Model
RW132XWR800A
RW132XWR900A
Description
10 to 16 Volt AC or DC
100 mA when batteries are fully charged in
transmission and reception modes
>12 hrs
3.6V, 18650 Lithium-Ion, 2200 mAh
32x 2-way Detectors and Camera Detectors,
3x Sirens, 3x Keypads, 16x Keyfobs, Panic Buttons
1xIO Expander
868.65 MHz, 10mW Max.
869.525 MHz, 100mW Max.
-10°C to 55°C (14°F to 131° F)
13 x 7.5 x 2.5 cm
0.2 Kg. (7 oz)
433.92/916 MHz, 868.65/869.525 MHz
Description
WL 2W Repeater 868/869MHz
WL 2W Repeater 433/916MHz
8