Maintenance And Cleaning; Avoiding Bad Odors; Protecting The Plastic Surfaces; Door Glasses - Beko RDNE535E32JZX Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 216

Maintenance and cleaning

6
Service life of the product is increase if it is
regularly cleaned
B
WARNING:
product before cleaning your
refrigerator.
• Never use any sharp and abrasive tools,
soap, household cleaners, detergent and
wax polish for cleaning.
• Dissolve one teaspoon of carbonate in
half liter of water. Soak a cloth with the
solution and wrung it thoroughly. Wipe
the interior of the appliance with this
cloth and the dry thoroughly.
• Make sure that no water enters the lamp
housing and other electrical items.
• Clean the door with a damp cloth.
To remove door and body shelves,
remove all of its contents. Remove door
shelves by moving them upwards. After
cleaning, slide them from top to bottom
to install.
• Never use cleaning agents or water
that contain chlorine to clean the outer
surfaces and chromium coated parts of
the product. Chlorine causes corrosion
on such
metal surfaces.

6.1. Avoiding bad odors

Materials that may cause odor are not
used in the production of our appliances.
However, due to inappropriate food
preserving conditions and not cleaning the
inner surface of the appliance as required
can bring forth the problem of odor.
Therefore, clean the refrigerator with
carbonate dissolved in water every 15 days.
• Keep the food in closed containers.
Microorganisms spreading out from
uncovered containers can cause
unpleasant odors.
• Never keep the food that have expired
best before dates and spoiled in the
refrigerator.
Refrigerator / User Manual
First unplug the
6.2.
Protecting the
plastic surfaces
Clean with arm water immediately as the oil
may cause damage on the surface when it is
poured on plastic surfaces.
6.3.

Door Glasses

Remove the protective foil on the glasses.
There is a coating on the surface of the
glasses.This coating minimizes the stain
build-up and helps to remove the possible
stains and dirt easily.Glasses that are not
protected with such a coating may be subject
to persistent binding of air or water based
organic or inorganic dirt such as limescale,
mineral salts, unburned hydrocarbons, metal
oxides and silicones that can easily and
quickly cause stains or material damage.
Keeping the glass clean becomes too difficult
despite the regular cleaning. Consequently,
the appearance and the transparency of
the glass deteriorates. Harsh and corrosive
cleaning methods and compounds will
intensify these defects and speed up the
deterioration process.
Water-based cleaning products that are
not alkaline and corrosive must be used for
regular cleaning purposes.
Non-alkaline and non-corrosive materials
must be used for cleaning so that the service
life of this coating lasts for a long time.
These glasses are tempered to increase their
durability against impacts and breaking.
A safety film is also applied to their rear
surfaces as an extra safety measure in order
to prevent them from causing damage to
their surrounding in case of a breakage.
*Alkali is a base that forms hydroxide ions
(OH¯) when it is dissolved in water.
Li (Lithium), Na (Sodium), K (Potassium) Rb
(Rubidium), Cs (Cesium) and artificial and
radioactive Fr (Fan-sium) metals are called
ALKALI METALS.
37/40 EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rdne535e31jzwRdne455e31dzwRdne455e31dzsRdne455e32dzx

Tabla de contenido