Scanning Folders And Tracks; Pausing Mp3/Wma/Wav Playback; Using Compression And Bmx - Pioneer DEH-P5750MP Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MP3/WMA/WAV Player
4
Press b to turn random play off.
Random :OFF appears in the display. Tracks
will continue to play in order.
Note
If you turn random play on during Repeat:FLD
and then return to the playback display, F.RDM
appears in the display.

Scanning folders and tracks

While you are using Repeat:FLD, the begin-
ning of each track in the selected folder plays
for about 10 seconds. When you are using
Repeat:DSC, the beginning of the first track of
each folder is played for about 10 seconds.
1
Select the repeat range.
Refer to Repeating play on the previous page.
2
Press FUNCTION to select Scan.
Press FUNCTION until Scan appears in the
display.
3
Press a to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track of the current folder (or
the first track of each folder) is played.
4
When you find the desired track (or
folder) press b to turn scan play off.
Scan :OFF appears in the display. The track (or
folder) will continue to play.
# If the display has automatically returned to
the playback display, select Scan again by press-
ing FUNCTION.
Notes
! After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during Repeat:FLD
and then return to the playback display, F.SCN
appears in the display.
Pausing MP3/WMA/WAV
playback
Pause lets you temporarily stop playback of
the MP3/WMA/WAV.
1
Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2
Press a to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
3
Press b to turn pause off.
Pause :OFF appears in the display. Play will re-
sume at the same point that you turned pause
on.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1
Press FUNCTION to select COMP.
Press FUNCTION until COMP appears in the
display.
Section
06
21
En

Publicidad

Tabla de contenido
loading

Tabla de contenido