IPC Green Jet 1010 Manual De Instrucciones página 18

tal safety requirement must be verified. If in
doubt, have the wiring installation checked
thoroughly by a professional electrician.
The manufacturer declines all liability for
damage caused as a result of connecting
the appliance to an unearthed electrical
installation.
- The appliance must be connected to the
electricity supply by way of a double pole
isolating switch with a minimum contact
opening of 3 mm and electrical specifica-
tions compatible with the appliance. (this
requirement does not apply to appliances
fitted with a plug and having a rated power
of less than 3kW).
It is important that the mains power circuit
should include a differential circuit breaker
that will cut off the supply if the intensity of
the current rises above 30mA for 30 ms, or
a device serving to monitor the earth circuit.
- The appliance is isolated from the mains
power supply only when unplugged from the
mains socket or when the double pole switch
is turned off.
- Failure to observe these requirements is
seen as negligent use of the product and
will release the manufacturer from all liability.
The appliance is designed and intended for
fixed installation.
- The appliance must be attended during
operation.
- The appliance is not intended for use by chil-
dren, adolescents or persons with reduced
physical, sensory or mental capabilities, or
by persons under the influence of alcohol or
lacking experience and knowledge.
Operators must be made aware of the
instructions for using the appliance by a
person responsible for their safety.
Children must be supervised to make sure
English
they do not play with the appliance.
- Use only original accessories guaranteed
to ensure safe operation of the appliance.
- The hose connecting the lance to the appli-
ance must not be damaged. Should damage
occur, replace the hose immediately. The
hose must be marked with the permissible
pressure, date of manufacture and maker's
name.
- High pressure hoses, fittings and couplings
are important for the safety of the appliance.
Use only original spare parts approved by
the manufacturer.
- Do not use the appliance if there are per-
sons and/or animals within its operating
range.
- High temperature jets may be dangerous if
not used correctly. The jet must never be di-
rected at persons and/or animals, or at elec-
trical equipment, or at the appliance itself.
- Use of the appliance must be evaluated
according to the type of treatment that must
be carried out.
Take precautions against the projection of
solid matter or corrosive substances by us-
ing suitable protective clothing.
- Use of the appliance must be evaluated
according to the nature of the area in which
the treatment takes place. (e.g: food or phar-
maceutical manufacturing premises, etc.)
The relative safety standards and conditions
must be observed.
- 18 -