Ego Power+ HT2410E Manual Del Usuario página 8

Cortasetos inalámbrico de 56 voltios con acumulador de ion de litio
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
DESCRIPTION
EN
KNOW YOUR HEDGE TRIMMER (Fig. A)
Hanging hole
1.
Tip protector
2.
Blade
3.
Hand guard
4.
Front handle
5.
Lock-off button
6.
Rear handle
7.
Battery-release button
8.
Latch
9.
Electric contacts
10.
Battery-mounting slot
11.
Batter-ejection
12.
Rear switch lever
13.
Front switch lever
14.
Hanging hole
15.
Blade guard
16.
WARNING: This product has been shipped
completely assembled. The hand guard shall never
be removed during use. Once damaged, replace it
immediately by a qualified service technician.
WARNING:
The safe use of this product requires an
understanding of the information on the tool and in this
operator's manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
OPERATION
WARNING:
Do not allow familiarity with this product
to make you careless. Remember that a careless fraction of
a second is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side
shields, along with hearing protection. Failure to do so could
result in objects being thrown into your eyes and other
possible serious injuries.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove the
battery pack from the tool when assembling parts, making
adjustments, cleaning, or when not in use.
8
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E
WARNING:
Do not use any attachments or
accessories not recommended by EGO
attachments or accessories not recommended can result
in serious personal injury.
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps, etc.
Tighten securely all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.
APPLICATION
You may use this product for trimming the hedges, shrubs
and bushes with a branch diameter of less than Ø26 mm.
NOTICE:
The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
INSTALLING/REMOVING THE BATTERY PACK
Charge before first use.
To Install (Fig. B)
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a "click".
To Remove (Fig. C)
Depress the battery-release button and pull the battery
pack out.
WARNING:
Always be aware for the location of your
feet, children, or pets when pressing the battery-release
button. Serious injury could result if the battery pack falls.
NEVER remove the battery pack at a high location.
HOLDING THE HEDGE TRIMMER (Fig. D, E & F)
The unit has both a front and rear handle. With the blade
directed away from you, hold the unit by both handles.
The switch lever in the front handle can be activated on
any of the three sides, giving you many choices for a
comfortable grip when performing cutting operations.
WARNING:
Always keep both hands on the hedge
trimmer handles. Never hold shrubs with one hand while
operating the hedge trimmer with the other hand. Failure
to heed this warning may result in serious injury.
STARTING/STOPPING THE HEDGE TRIMMER
Before operating, remove the shield and hold the trimmer
with both hands, one hand on the rear handle and the
other on the front handle. Then check for stable footing,
upright standing and a proper cutting distance.
. The use of
TM

Publicidad

Tabla de contenido
loading

Tabla de contenido