Technoline WS6650 Manual De Instrucciones página 17

7.
battery needs replacing.
Temperature memory
1. Press MAX/ MIN button (7) to display maximum recorded temperature,
minimum recorded temperature, and current temperature. MAX
indicates maximum temperature. MIN indicates minimum temperature.
2. Press and hold MAX/ MIN button (7) for approximately 3 seconds to
reset the maximum and minimum temperature and humidity records.
Temperature display
1. The IN temperature displays the indoor temperature. It is the
temperature of the location of the weather station.
2. The OUT temperature displays the temperature of the remote
temperature sensors.
3. Press CHANNEL button (6) on weather station repeatedly to display
the temperature of channel 1, channel 2 and channel 3.
4. When
the remote sensors channel. Press CHANNEL button (6) to cancel.
Celsius / Fahrenheit
1. Press +/ C/ F button (5) to toggle between displaying the temperature
in Celsius and Fahrenheit.
Temperature Trend
1.
2.
3.
Warnings
Do not subject the unit to excessive force, shock, dust, temperature or humidity.
Do not immerse the unit in water.
Dispose the complete unit when battery is no longer charging or when the unit is
no longer displaying the temperature and humidity.
Do not remove any screws.
Do not dispose this unit in a fire. IT MAY EXPLODE.
Keep unit away from small children. The unit or parts of the unit might be a
choking hazard.
Never attempt to recharge the batteries in any other methods.
Dispose the unit legally.
Recycle when possible.
will be displayed if any of the remote temperature sensor's
is shown, the display will automatically show through all
indicates the temperature is in a increasing trend.
indicates the temperature is in a no change trend.
indicates the temperature is in a decreasing trend.