Grizzly Tools BLSB 3030 Traducción Del Manual De Instrucciones Original página 92

GB
• Employ the device in a completely as-
sembled condition only.
• Employ the device suction operating
mode only when the collection bag is
attached.
• Do not intake any burning, smoulder-
ing or smoking materials (e.g. ciga-
rettes, embers etc.), fumes or easily
inflammable, poisonous or explosive
materials.
• Do not intake any moist or wet mate-
rial or any liquids.
• Only use the replacement parts that
are supplied and recommended by
our Service Centre.
• Do not use the device in closed or
badly ventilated rooms. Do not use
the device near inflammable liquids
or gases. In case of non-observance
of these directions, danger of fire or
explosion exists.
• Keep the device in a dry location and
out of reach of children.
• Keep all cooling air inlets clear of dirt.
• Never let the internal combustion
engine run in a confined space, as
dangerous carbon monoxide can ac-
cumulate.
• Warning: Petrol is highly flammable.
Fire or explosions can lead to severe
burns.
- store petrol only in the specially pro-
vided containers;
- refuel only in open areas and never
smoke during the refuelling operation;
- petrol has to be added before start-
ing the engine. The fuel tank cap may
not be opened and petrol may not be
added while the engine is running or
the device is still hot.
- if there was an accidental petrol spill,
do not attempt to start the engine.
Instead, remove the device from the
petrol contaminated surface. You must
92
not try to ignite the engine until all pet-
rol vapours have evaporated.
- if the fuel tank cap is damaged, re-
place it for safety reasons.
• Shut off the engine, disconnect the
spark plug connector and make sure
that all movable parts have stopped
moving:
- before removing obstructions, or
loosening blockages from the ejection
opening;
- before checking the device, cleaning it
or performing maintenance work on it;
- when a foreign object has been hit.
Check for damages to the device and
perform any required repairs before
starting and working with the machine
again.
- if the device starts to vibrate abnor-
mally strong, an immediate inspection
is required;
- when leaving the device;
- before refuelling.
CAUTION! The following states
how damage to the trimmer and
possible injury to people can be
avoided:
• Make sure that all nuts, bolts and
screws are properly tightened, and
that the device is in safe working or-
der. Many accidents are the result of
poorly maintained machinery.
• Never store the device with fuel in its
tank inside a building, where fuel va-
pours may be coming in contact with
fire or sparks.
• Give the engine time to cool off before
you store the device in an enclosed
space. Possible fire hazard.
• To avoid risk of fire, keep engine,
exhaust and the area around the fuel
tank free of grass, leaves, or leaking
grease (oil).