Specifications; Dimensions - JBL SYNTHESIS SCL-1 Manual Del Propietário

sPeCIFICaTIOns

Speaker Type
Low Frequency Driver Size and Material
High Frequency Driver Size and Material
Recommended Amplifier Power, Full Bandwidth
Recommended Amplifier Power, 80 Hz Crossover
Nominal Impedance
Loudspeaker Sensitivity
Frequency Response
Crossover Frequency
Coverage area, -6 dB @ 10 kHz
Coverage area, -6 dB @ 20 kHz
Enclosure Type:
Controls
Input Type
Product Dimensions (with grille)
Product Weight (with grille)
Finishes:

DIMensIOns

483,1
2-Way In-room Loudspeaker
Dual 12-inch (300mm) Black Carbon Cellulose Composite Cone
(C4) cast-frame woofers
®
3" (75mm) Dual annular Teonex
driver with dual neodymium motor structures mated to High-
TM
Definition Imaging (HDI ) Horn
500 WRMS, minimum
500 WRMS, minimum
4 Ohms
94dB/2.83V/1m
40 Hz - 24 kHz (-6 dB), 3rd order LF roll-off
775 Hz
Approximately 120 degrees horizontal x 100 degrees vertical
Approximately 90 degrees horizontal x 70 degrees vertical
Complementary Bass Alignment System (CBAS
3 Position - No grille, With grille, or Behind screen
Dual sets of gold-plated spring-loaded binding posts
48.02" H x 19.02" W x 15.4" D
(1219.7mm x 483.1mm x 390.8mm)
177.5 lb. (80.5 kg)
Black Vinyl
11
ring-diaphragm compression
TM )
368,3
390,8