How To Use The Extender; Introduction - Philips Pronto RFX9200 Manual De Inicio

1

How to Use the Extender

1.1

Introduction

Infrared (IR) remote controls do not work properly when obstacles between the remote
control and the audio/video devices disturb the operating signal. This problem can be
solved using radio frequency (RF) as a carrier for IR commands. The Remote Control, in
combination with the Extender, can operate audio/video devices from virtually any location.
A/V equipment
Media Center
When the front blaster of the Extender cannot reach all devices or transmits with too much
power, you can use the included Single IR emitters. You can set up the Single IR emitters in
two ways:
• The Single IR emitters in combination with the front blaster.
When there is limited space around the IR receivers of the devices, for instance in a small
closet.
• The Single IR emitters instead of the front blaster.
When you want to transmit IR signals very accurately, you turn off the front blaster and
control the devices by using the Single IR emitters alone.
4
Extender
PCX9200
Remote Control
How to Use the Extender