Klarstein Eliana Manual De Instrucciones página 25

5. Fix the outside chimney bracket
on the outside chimney, and be
sure that the inside chimney can
be adjusted the height in it freely.
Afterwards, install the chimney
on the cooker hood and lead the
expansion pipe to outside (see
figure 3).
6. Adjust the height of the inside chimney to the position of the inside chimney bracket
and fix it with a screw. After adjusting the position, fix the body with a safety screw
(see figure 4).
Note: The two safety vents with a diameter of 6 mm are positioned on the back
housing.
Inside chimney
Outside chimney bracket
Outside chimney
Figure 4
Figure 3
EN
25