Installation - Klarstein Eliana Manual De Instrucciones

EN
22

INSTALLATION

Note: When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room must be
not exceed 4 Pa (4 x 10-5 Bar).
Mounting of the v-flap
If the cooker hood does not have an assembled V-flap (1), you should mount the
half-parts to its body. The images only show an example of how to mount the V-flap,the
outlet may be various according to different models and configuration.
Example of mounting the V-flap (1)
1. Mount two half-parts (2) into the body (6).
2. A pin (3) should be top oriented
(see figure below).
3. The axis (4) should be inserted in the holes (5) on the body.