Tabla de contenido
Publicidad
10
www.raider.bg
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire
and / or severe injuries. Keep these instructions in a safe place.
1. Safety in the workplace.
1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to the occurrence
of an accident.
1.2. Do not operate in an environment where the impact drill with an increased risk of an explosion in the
vicinity of flammable liquids, gases or powders.
During operation of the impact drill can be separated sparks that can ignite powders or fumes.
1.3. Keep children and bystanders at a safe distance while working with the impact drill.
If your attention is diverted, you may lose control over the impact drill.
2. Safety when working with electricity.
2.1. Plug of the impact drill must be suitable for contact. In no case is allowed to modify the structure of
the plug. When working with electrical zero, do not use plug adapters.
Using original plugs and sockets reduces the risk of electric shock.
2.2. Avoid touching your body to earthed bodies, eg. pipes, heaters, stoves and refrigerators. When your
body is grounded, risk of electric shock is greater.
Protect your impact drill from rain and moisture.
Penetration of water into the impact drill increases the risk of electric shock.
2.3. Do not use a power cord for the purposes for which it is not provided, eg. to bear the impact drill
for cable or removing the plug from the outlet. Protect cords from heat, oil, contact with sharp edges or
points of mobile machines.
Damaged or twisted cables increase the risk of electric shock.
2.4. When working with drill impact out, switch the machine only in installations equipped with electric
switch Fi (safety shut-off switch with Residual protection), and current leakage, which is triggered when
DTZ must be no more than 30 mA, according to "Regulation 3 device for the electrical equipment and
power lines. Use only extension, suitable for outdoor use. Using the extension, designed for outdoor use
reduces the risk of electric shock.
2.5. If you require the use of the impact drill and in moist environment, plug the machine only in
installations equipped with electric switch Fi. Use of such a safety switch utechni currents reduces the
risk of electric shock.
3. Safe way of working.
3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the
impact drill, when you are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work impact drill may have the effect of extremely serious injuries.
3.2. Work with protective work clothing and always with safety glasses.
Wearing suitable for drilling and the activities of personal protective equipment, such as respiratory
masks, healthy, tightly closed shoes grapple with a stable, protective helmet and silencers (hearing
protectors), reduces the risk of accident.
3.3. Avoid the danger of incorporating the impact drill inadvertently. Before you turn the plug into the
power supply network, make sure the trigger switch is in position "off". If, when you carry the impact drill,
keep your finger on the trigger switch, or if you submit a voltage of the impact drill, where it is included,
there is the risk of accident.
3.4. Before you turn on the impact drill, make sure that you have removed all of her utilities and wrenches.
Utilities, forgotten rotating unit can cause injuries.
3.5. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep the
balance. So you can control the impact drill better and safer if unexpected situations arise.
3.6. Work with appropriate clothing. Do not operate with loose clothing or ornaments. Keep your hair,
clothes and gloves at a safe distance from rotating units of the impact drill. Robes, attire, long hair can
be caught and carried away by chuck.
3.7. If possible use an external aspiration system, make sure it is switched on and functioning properly.
Use of the aspiration system reduces the risks due to the discharge dust at work.
4. Care to drill to hit.
4.1. Do not overload the impact drill. Use only the impact drill in accordance with its intended purpose.
Publicidad
Tabla de contenido
