Maintenance And Storage; Additional Safety Instructions; Assembly Of The Pole Saw - Parkside PHSL 900 A3 Traducción Del Manual De Instrucciones Original

Cortasetos con mango largo
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 144
use the hedge trimmer. Never try to
use an incomplete hedge trimmer or a
hedge trimmer with impermissible mo-
difications.
g) Always use both hands when the
hedge trimmer is equipped with two
handles.
h) Always familiarise with your surroun-
dings and pay attention to potential
dangers that you cannot hear because
of the noise the hedge trimmer makes.

Maintenance and storage

a) If the hedge trimmer is taken out of ope-
ration for purposes of maintenance, in-
spection or storage, turn off the motor,
pull the mains plug and make sure that
all rotating parts have come to a stand-
still, and let the machine cool down
before you check or adjust it, etc.
b). When transporting or storing the
hedge trimmer, the cutting unit must
always be covered with the protective
hood of the cutting unit.
Additional safety
instructions
If possible, connect the device only to
a socket with a residual current circuit
breaker (RCCB) with a tripping current
of not more than 30 mA.
If replacement of the connecting ca-
ble becomes necessary, this is to be
carried out by the manufacturer or its
agent in order to avoid safety risks.
Hold the electric tool only by the in-
sulated gripping surfaces, as the saw
chain may come into contact with con-
cealed power lines. Contact with a live
wire can also cause a charge in metal
parts of the appliance and result in an
electric shock.
Carefully inspect the surface to be cut,
and remove all wires and other foreign
bodies.
Check the appliance before each use
for obvious defects such as loose,
worn or damaged parts. Check the
appliance for significant damage or
defects if it is dropped.
Keep the cable away from the cutting
area. The cable may be covered by
vegetation during work and acciden-
tally be severed.
Keep all body parts away from
the blade. Do not attempt to re-
move clippings or to hold onto
material to be cut when the
blade is running. Only remove
jammed trimmings when the
device is shut off. Remove the
plug from the mains socket. A
moment of inattention when using the
trimmer can result in serious injuries.
Carry the hedge trimmer by the
handle with the cutter blade
stopped. When transporting
or storing the hedge trimmer
always fit the cutting device
cover. Proper handling of the hedge
trimmer will reduce possible personal
injury from the cutter blades.
Assembly of the pole
saw
Pull out the power plug before carry-
ing out any work on the equipment.
Use only original parts.
1. Unpack the device and check it for
completeness.
GB
IE
29

Publicidad

Tabla de contenido
loading

Tabla de contenido