Yakima SlickROC 4 Manual Del Usuario página 3

INSERT TONGUE INTO
VEHICLE'S HITCH.
IF SPARE TIRE CAUSES
INTERFERENCE, DO NOT
USE THIS PRODUCT!
Align the holes in the receiver
to the holes in the base.
Extend arms.
Pull the cam lever
toward you and
lift the arms.
CAUTION
Keep fingers away from
ALL moving parts!
Attach one rubber strap to each
cradle and stabilizer.
1033250E-3/15
INSTALL LARGE BOLT
AND LOCK-WASHER.
Install bolt from right side
of receiver.
TIGHTEN with hitch wrench.
To slide cradles along the
carrier arms, close cradle
stabilizer
RAISE ARMS COMPLETELY.
CRADLE
POSITIONING
and stabilizer.
Close cradles while
loading bikes.
LOCK THE TONGUE
TO THE HITCH.
• Attach hitch lock.
• Insert the key and
lock the lock.
• Close the cap.
Arms will remain
in position.