Sistem-Air JOLLY Manual De Instalación, Uso Y Mantenimiento página 43

4.5 Wall fitting with pre-installed JOLLY BOX casing
(item number
(If installed) remove the protection cover
of the JOLLY BOX casing by unscrewing
the 6 locking screws.
( 2 )
( 1 )
Jolly-Jolly Contact 01-04/01
Installation, use and maintenance guide
8500.0)
1
Insert the sponge (1) in the round housing
2
(2) of the Jolly Box casing.
NOTE: the sponge must not go beyond
the edge of the special housing.
Plug-in the suction unit
(see paragraph 4.7)
Arrange the Jolly suction unit inside
4
the casing (Jolly Box); pay special attention
to the position of the electric cable.
13
3