Feiss OL14373 Instrucciones De Montaje

Installation Instructions for
Randhurst Outdoor Post
Outdoor
G ENERAL RODUCT NFORMATION P
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a
additional information.
This instruction shows a typical installation.
1A
LAMP
CANDLE FOLLOWER
POST SCREW
3
POST
Connect the fixture to a suitable ground in accordance to local electrical codes.
1
Connect the white fixture wire to the neutral power line wire with a wire nut.
2
Connect the black fixture wire to the hot power line wire with a wire nut.
3
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
4
Install the candle followers by placing them on top of the candle tubes.
5
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
6
Insert the glass panels through the bottom of the shade, then secure them in place using the clips.
7
Install the shade onto the fixture and secure them together using the shade screws.
8
Place the cover onto the threaded pipe and secure it in place by screwing the fixture loop onto the pipe.
9
I :
LED dimmer. Consult lamp manufacturer for
6
5
4
4
2
CAUTION RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SHADE
GLASS PANEL
CLIP
8
POST
1
OL14373
-
9
FIXTURE LOOP
COVER
THREADED PIPE
7
FIXTURE
SHADE SCREW
OL14373
1.0