LEGRAND 430 539 Guia De Instalacion página 3

75 mm
51 mm
51 mm
Description
This spot type indoor camera uses SONY high sensitive Super HAD 1/3" interline transfer CCD Image Sensor
(CCD = Charge Coupled Device).
Installation
Surface unit installation
Safety instructions
This product should be installed in line with installation rules, preferably by a qualified electrician. Incorrect installation and use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be opened and repaired exclusively by personnel
trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and guarantees.
Use only Legrand brand accessories.
(A) TO DC POWER
(B) TO MONITOR
(C) HOUSING ASSEMBLY
(D) SCREW
(E) METAL HOLDER
(F) CAMERA BODY
(G) DOME ASSEMBLY
51 mm
In-ceiling installation
(A) TO DC POWER
(B) TO MONITOR
(C) HOUSING ASSEMBLY
(D) DOME ASSEMBLY
(E) SCREW