Parts List; Opening The Nuna Travel Cot; To Set Up The Bassinet - Nuna sena aire Manual De Instrucciones

Parts List

Check that you have all the parts for this product before
using it. The assembly must be performed only by adults
Tools : No tools required.
1 Travel cot
2 Mattress
9 SENA aire Instructions
3 Storage bag
4 Sheet
1
2
4
3

Opening the Nuna Travel Cot

1
- To open the travel cot frame, unfasten hook and
loop straps from the mattress and unfold. (1)
2
- Pull the short sides of the travel cot frame
outward. (2)
3
- Reach through bassinet and push down on the center
hub at the bottom of travel cot. (3)
MAKE SURE bottom of travel cot is pushed all the way to
the floor.

To Set Up the Bassinet

1
- Install mattress soft side up. Bassinet set up is
complete. (4)
To Set Up Travel Cot
1
- Remove mattress from the bassinet. Remove the
4 snaps on the bassinet fabric from the snaps at the
center of each side of the travel cot. (5)
2
- Release the 4 buckles on the four corners of the
travel cot. Once the buckle is separated, remove
long strap from the loop on the travel cot. (6)
3
- Remove the bassinet from travel cot. (7)
4
- Place the mattress on the bottom of the Travel cot. (8)
5
- Feeding the straps on the corners through the holes.
Fasten the hook and loop. Repeat on other corners. (9)
Push down on all four corners of the mattress to assure
the mattress is secured to the bottom of travel cot.
SENA aire Instructions 10