Drive Medical PreserveTech 12011KD-1A Manual De Instrucciones

Drive Medical PreserveTech 12011KD-1A Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

maintenance
Drive recommends periodic visual inspection of this
product by the user, to ensure that all parts and hardware
are secure, that components are in good working order
and not worn, torn, frayed, or loose, and that there are no
obstructions or impediments to normal, safe operation. If
any part or mechanism appears to be unsafe or compro-
mised, do not use the product. If you experience problems,
please contact the provider that sold you the product or
visit www.drivemedical.com/help for more info.
Drive PreserveTech™ products are manufactured with
an antimicrobial* agent that helps to minimize the
growth of stain and odor-causing bacteria and mold on
treated surfaces.
*Antimicrobial properties are built in to protect the
products. These products do not protect users or others
against bacteria, viruses, germs or other disease organisms.
lifetime limited warranty
Your Drive brand product is warranted to be free of de-
fects in materials and workmanship for the lifetime of the
original consumer purchaser.
This device was built to exacting standards and care fully
inspected prior to shipment. This Lifetime Limited War-
ranty is an expression of our confidence in the materials
and workmanship of our products and our assurance to the
consumer of years of dependable service.
This warranty does not cover device failure due to own er
misuse or negligence, or normal wear and tear. The war-
ranty does not extend to non-durable components, such as
rubber accessories, casters, and grips, which are subject to
normal wear and need periodic replacement.
If you have a question about your Drive device or this war-
ranty, please contact an authorized Drive dealer.
© 2020 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
PreserveTech™
Transfer Bench
PreserveTech™
Banqueta de
transferencia
PreserveTech™
Banc de transfert
item #
12011KD-1A
EU Authorized Representative
Y Sung Handelscertretung
Duesselthaler Str. 24 40211
Duesseldorf, Germany
www.drivemedical.com
VER.A.12.20.

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Drive Medical PreserveTech 12011KD-1A

  • Página 1 maintenance PreserveTech™ Drive recommends periodic visual inspection of this Transfer Bench product by the user, to ensure that all parts and hardware are secure, that components are in good working order and not worn, torn, frayed, or loose, and that there are no PreserveTech™...
  • Página 2 5. Turn transfer bench right-side-up. Attach armrest assembly instructions by depressing brass push pins and sliding into the arm receptacle on the side of the bench. Make sure the 1. Remove contents from carton. arm arcs outward, not inward (Figure 3). 2.
  • Página 3 7. To assemble backrest, insert pole into backrest precautions support by depressing push pin and sliding into receptacle. Repeat for second pole (Figure 5). Weight Capacity: 400 lbs / 181 kg 1. Inspect all parts for shipping damage before assembly. If there is shipping damage - DO NOT USE.
  • Página 4 5. Coloque la banqueta de transferencia al derecho. instrucciones para el armado Instale el apoyabrazos presionando hacia abajo las clavijas de presión de latón y deslizándolo en el 1. Retire el contenido de la caja de cartón. receptáculo para los brazos ubicado al costado de la 2.
  • Página 5 7. Para instalar el respaldo, introduzca la vara en el so- precauciones porte del respaldo presionando hacia abajo la clavija de presión y deslizándola dentro del receptáculo. Repita lo mismo con la segunda vara (Figura 5). Capacidad de peso: 400 lbs / 181 kg 1.
  • Página 6: Mode D'assemblage

    5. Retourner le banc de transfert à l’endroit. Fixer les mode d’assemblage accoudoirs en appuyant sur les goupilles-poussoirs en laiton et en les glissant dans les orifices des accou- 1. Retirer le contenu de la boîte. doirs sur le côté du banc. Vérifier que les arcs des 2.
  • Página 7 7. Pour assembler le dossier, insérer le poteau dans le précautions support du dossier en enfonçant la goupille-poussoir et en la glissant dans l’orifice. Répéter cette étape pour le deuxième poteau (figure 5). Capacité de poids : 181 kg / 400 lb 1.
  • Página 8: Mantenimiento

    entretien mantenimiento Drive recommande une inspection visuelle périodique de ce Drive recomienda una inspección visual periódica de este produit par l’utilisateur afin de s’assurer que toutes les pièces producto por parte del usuario, para garantizar que todas las et le matériel sont sécurisés, que les composants sont en bon piezas y herrajes estén seguros, que los componentes estén état et ne sont pas usés, déchirés, effilochés ou desserrés en buen estado de funcionamiento y no estén desgastados,...

Tabla de contenido