Emergency Procedures; Maintenance Instructions - BriskHeat Cloth Heating Jackets Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EMERGENCY PROCEDURES

Read and understand these procedures prior to using this heater.
Disconnect power to the heater in the event of an emergency.
Electric Shock:

Do not touch the injured person while they are still in contact with the electrical
current.

Call your local emergency service if the injured person experiences: severe burns,
confusion, difficulty breathing, heart rhythm problems, cardiac arrest, muscle pain and
contractions, seizures or a loss of consciousness.
Minor Burns:

Hold the burned area under cool running water for 10-15 minutes.

Remove rings or other tight items from burned area.
Major Burns:

Call your local emergency service.

Protect the person from further harm.

Remove rings or other tight items from burned area.

Monitor breathing and perform CPR if necessary.
Fire:

Call your local emergency service.

If it is safe to do so, use a fire extinguisher to fight the fire, otherwise evacuate to a
safe distance and wait for help to arrive.

This heater is built from material that will not support a flame but could ignite nearby
combustible material.
®
© BriskHeat
Corporation. All rights reserved.
Cloth Heating Jackets
9

MAINTENANCE INSTRUCTIONS

Anyone who reads and understands these instructions is
qualified to maintain this heater.
Maintenance:

All maintenance should be performed after heater has cooled to room temperature
and with the electricity disconnected.

This product should be inspected prior to being installed and at least every 12 months
during use.

Dirt, oil, grease or other foreign matter can be removed with a damp rag and mild
household cleaners.

Do not attempt to repair a damaged heater.
Inspection:

Inspection should be performed after the heater has cooled to room temperature and
with the electricity disconnected.

The heater should be free of any cuts, cracks, or punctures.

The power leads should not have any visible breaks in their insulation.

The heater should be free of any build-up of dirt, oil, grease, or other foreign matter.
Storage:

This product should be stored indoors.
Disposal:

This product does not contain any hazardous substances and may be discarded with
domestic waste.
®
© BriskHeat
Corporation. All rights reserved.
Cloth Heating Jackets
10

Publicidad

Tabla de contenido
loading

Tabla de contenido