Team kalorik Kitchen Originals HCM1000 Manual De Instrucciones página 11

❑ Stand the appliance on a table or flat surface.
❑ Only use this appliance for culinary preparations.
✁
❑ It is absolutely necessary to keep this appliance clean at all times
as it comes into direct contact with food.
❑ Make sure the appliance is unplugged before inserting, removing
or cleaning the pouring jug.
❑ The pouring jug should be mounted correctly on the motor base
before you plug it into the mains. The appliance is equipped with
a safety, which prevents the pouring jug from working if it is badly
mounted.
❑ Keep your hands outside the appliance when plugged in in order
to avoid injuries.
❑ Do not insert any object while in use.
❑ Never let children use the appliance, even when they are
supervised.
❑ Do not use the appliance without any liquid in it.
❑ Always fill under the maximum mark. The liquid must never be
above the maximum mark. Do not overfill the appliance as boiling
liquid might overflow.
❑ Make sure the appliance has cooled down before cleaning and
storing it.
❑ Make sure the cord never comes into contact with the hot parts of
the appliance.
❑ Never touch the hot parts of the appliance during cooking.
❑ Be cautious while transporting your appliance filled with hot food,
water or other liquids. It is not recommended to move your
appliance when it has not completely cooled down.
❑ Your appliance must never be switched on through an external
timer or any kind of separate remote control system.
❑ Please note: Should the symbol !
surface, you need to be careful when handling the product. This
symbol means: CAUTION, this surface may get very hot during
use.
The symbol !
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore
advisable to always handle them with care and if possible with the
help of isothermal gloves or other thermal protection. In case of
doubt concerning the temperature of a certain surface it is always
preferable to protect oneself.
!
is always put on the surface with the highest
11 !
! !
Assembly page ! ! !
! !
!
be indicated on a certain
TKG HCM 1000 - 150121
11 42 /!