Gateway NV47H Guia Del Usuario página 86

3. Insert a blank disc into the drive indicated in the
click Next. You will be shown the backup progress on the screen.
The drive ejects each disc as it completes burning it.
4. Remove the disc from the drive and mark it with a permanent
marker.
Important: Write a unique, descriptive label on each disc, such as
'Windows Recovery Disc 1 of 2' or 'Apps/Drivers Recovery disc'.
Make sure you keep the discs in a safe place that you will
remember.
5. If multiple discs are required, insert a new disc when prompted,
then click OK. Continue until the process is complete.
84
Backup to
list, then