Gateway NV47H Guia Del Usuario página 92

Recovering from the hard drive during startup
To reinstall Windows and all pre-installed software and drivers:
1. Turn on your computer, then press Alt+F10 during startup.
Recovery Management
2. Click on Restore system from factory default.
Caution:
drive.
3. Click on Next. Your hard drive's original, factory-loaded contents
are recovered. This process will take several minutes.
Recovering from your recovery discs
To reinstall Windows and all pre-installed software and drivers:
1. Turn on your computer, insert the first system recovery disc into
your optical disc drive, then restart your computer.
Caution:
drive.
2. If it is not already enabled, you must enable the
1. Press F2 when starting your computer.
2. Use the left or right arrow keys to select the Main menu.
3. Press the down key until F12 Boot Menu is selected, press F5 to
change this setting to Enabled.
4. Use the left or right arrow keys to select the Exit menu.
5. Select Save Changes and Exit and press Enter. Select OK to
confirm.
90
opens.
Continuing the process will erase all files on your hard
Continuing the process will erase all files on your hard
Gateway
F12 Boot Menu
: