Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A. Seat
B. Armrests
WEIGHT CAPACITY: 350 LB / 158 KG
assembly instructions
1. To install arms, depress push pins on armrests (B) and
insert into mounting tubes. Make sure armrests are
locked in place by pulling them.
2. Raise existing toilet seat and lid assembly; place rear
wing of seat (A) around rim of toilet bowl.
NOTE: Some toilet bowls may require the seat as-
sembly to be removed to allow proper fit. In addition,
the front adjustment brace must clear the rim of the
toilet for the raised toilet seat to fit securely.
3. With seat (A) resting correctly on rim, straighten and
center product as necessary. Turn adjustment knobs
to tighten product securely in place.
NOTE: Rubber pads on
front lock should touch
the inside of the toilet
bowl and rubber pads on
the left and right locks
should touch the outside
of the toilet bowl.
NOTE: Do not use tools to tighten adjustment knob.
Be careful not to over-tighten, as threads on adjust-
ment brace may strip.
parts/components
A
B
Publicidad
Tabla de contenido
