Using Your Appliance - TEFAL POWERMIX MINI BL1KKAKR Manual De Instrucciones

USING YOUR APPLIANCE

Using the blender (A)
• Correctly position the seal (A4) on the blade (A5) and blade base (A6)
(Fig. 4).
• Place the assembled blade on the blender jar by turning the blade set
anti-clockwise (Fig. 5).
• Lock it by turning the blade set clockwise on the motor unit (Fig. 6).
• Put the ingredients in the blender jar without exceeding the maximum
level indication - 600ml (Fig. 7).
Warning: Do not process hot liquids (over 60ºC/140ºF) in the blender
jar.
• Place the lid (A2) on the blender jar and place the measuring cup (A1)
and turning clockwise to lock the lid (Fig. 8).
• Plug in, button LED flash indicate the appliance is powered, press the
On/Off button to start blending (Fig. 9).
• 1 minute Auto Blend Program on this appliance:
– Automatic blending when pressing the On/Off button: 30 seconds
auto blend, then pause for 2 seconds, then auto blend for 28 seconds.
– Press the On/Off button to stop the operation during auto blending.
• Button LED keep ON during operation.
• Button LED flash after program completed.
• 2 positions are possible for the blender jar handle to the right or to the
left of the motor unit.
• Do not use the blender continuously for more than one minute, wait for at
least three minutes before switching it on again.
Using the On-the-go (D)
• Put the ingredients in the on-the-go bottle (D2) without exceeding the
maximum level - 600ml (Fig. 12).
Warning: Do not process hot liquids (over 60ºC/140ºF ) in the on-the-
go bottle.
• Place the blade (D3) on the on-the-go bottle by turning the blade
clockwise (Fig. 13).
• Turn over the on-the-go bottle and position it on the motor unit (Fig. 14).
• Plug in, button LED flash indicate the appliance is powered, press the
On/Off button to start blending (Fig. 16).
EN
25