Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Draw end of lead bunch with 14-input connection to the left side:
a) Disassemble 14-input connection (located on the left side) in vehicle and connect it with suitable connection in
the electric bunch,
b) Find and cut fog lights lead in lead bunch. Put a jacket shrinking under high temperature on each lead end in
such a way, that the end is located in the middle of the jacket's length and then heat the jacket on the lead using
either a singeing machine or a lighter,
c) Clip quick joints at the end of leads,
d) Connect quick joint assembled on lead running to fog lights switch to blue lead from connection bunch. Connect
quick joint assemble on lead running to fog lights to grey lead from connection bunch.
Connect white/black (7-polar), white and white/black (13-polar) leads to earth (e.g. drill a 3mm diameter hole,
7.
and connect and fix the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion remedy).
8.
Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow, brown/green leads) is provided for expanded socket
functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order the follo-
wing parts:
Function "current supply and earth"
Function "current supply, charge line and earth"
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
part no. 014-169
part no. 015-069
Publicidad
