Cleaning And Maintenance; Waste Disposal And Environmental Protection - Parkside PPC 30 A1 Traducción Del Manual De Instrucciones Original

Scope of Delivery
Unpack the pressure washer and verify the
contents:
- Patio cleaner
- Connection pipe
- Pipe extension
- Adapter
Fitting
• Screw the connection pipe (2) into the
pivoting connector (3).
• To extend your reach, snap on and
turn the bayonet mount of the pipe ex-
tension (1) to the connection pipe (2).
• To connect to the pressure washer,
snap the bayonet mount into the pres-
sure washer's jet gun.
• The adapter (6) has a bayonet mount
which you can choose to snap in after
the connection pipe (2) or after the
pipe extension (1).
Start-up
Take heed of the backstroke gen-
erated by the jet of water. Stand
firmly and hold the jet gun tightly.
You may otherwise injure yourself
or others.
• Do not release water from the pres-
sure washer until the patio cleaner
rests on the surface you are cleaning.
• Always hold the patio cleaner by the
handle (5) when washing down walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed for
scouring out or scrubbing.
Cleaning and
Maintenance
Cleaning
Always keep the washer clean. Do not
use any detergents or solvents.
• Only clean the pressure washer with a
soft brush or a slightly moist cloth.
Maintenance
The patio cleaner is maintenance-free.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts.
Storage
• Store the patio cleaner in a frost�free
room.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center
about this.
Defective units returned to us will be dis-
posed of for free.
GB MT
19