Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Maintenance/cleaning notes
- Before carrying out any cleaning or maintenance work, remove the plug or switch off the electrical
equipment!
- Check regularly, but most defi nitely before every use, the mains cable and mains plug for damage.
- If any damage is visible, then further use of the unit must not be made.
- If any damage and/or reduced functioning occurs, switch off and do not manipulate the unit.
- If, in such as event, a repair is necessary, contact an authorised by the manufacturer customer service
point.
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp brush.
- Do not use petrol or any similar light fl ammable cleaning material.
- After cleaning, the fan must be completely re-assembled.
Storage
- If the fan is not to be used for some time, then store it in a dry room.
- In addiion, you could put a cover on your unit to protect it from dust or dirt deposits.
Disposal
- Remove mains plug
- Cut through the mains cable at the plug
- Dispose of the unit in a proper manner.
WARNING:
- This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understands
the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similar qualifi ed person in order to avoid a hazard.
- Ensure that the fan is switched off from the supply mains before removing the guard.
Help with faults
Fault
Blade does not turn.
If the fault can not be remedied using the above listed remedies, then the plug has to be removed from
the socket.
A specialist must now establish the cause and carry out the repair work accordingly.
If the mains cable to this unit is damaged, then it can only be repaired by a repair workshop named by
the manufacturer, due a special tool being needed.
Note:
Opening the unit and repairs may only be carried out by a specialist!
8
Cause
Speed setting to „0".
Mains plug not correctly
inserted.
Household fuse blown/trip
defective.
Fuse has blown due to over-
load (motor overheating).
Remedy
Switch on unit.
Insert mains plug.
Check household fuse/trip.
Remove unit from mains supply. Pull plug
from the socket and have the unit repaired
by a specialist or customer service.
Publicidad
