Hilti SID 4-A22 Manual Del Usuario página 27

5.5 Setting the torque
▶ Push the torque selector button repeatedly until the desired torque setting
is displayed in the torque display.
5.6 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.7 Screwdriving
WARNING
Risk of injury and damage. Screws/bolts or the workpiece may be
damaged by excessively high torque; this may also lead to serious injury.
▶ Ensure that the fastener and attachment will withstand the level of
torque generated by the tool.
1. Move the forward/reverse switch into the middle position.
2. Use the torque selector button to set the desired torque. → page 23
3. Set the forward/reverse switch to the desired direction of rotation.
5.8 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is
pressed in.
5.9 Switching off
▶ Release the control switch.
5.10 Removing the battery
1. Press the two battery release buttons and hold them in the pressed
position.
2. Remove the battery from the tool.
6 Care and maintenance
Note
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Center or online at: www.hilti.com
Printed: 27.09.2016 | Doc-Nr: PUB / 5293888 / 000 / 01
All manuals and user guides at all-guides.com
6
8
7
English 23