Hilti SID 4-A22 Manual Del Usuario página 28

▶ Keep the product, especially its grip surfaces, clean and free from oil and
grease. Do not use cleaning agents containing silicone.
▶ Never operate the product when the air vents are blocked. Clean the air
vents carefully using a dry brush. Do not allow foreign objects to enter the
interior of the product.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals.
7 Transport and storage
WARNING
Risk of fire! Risk of short circuiting.
▶ To avoid short circuits and associated heat generation, Li-ion bat-
teries should never be stored or transported in loose, bulk form and
without protective measures.
▶ Remove the battery before transporting or storing the impact screwdriver.
▶ Observe the nationally and internationally applicable transport regulations
when shipping batteries by road, rail, sea or air.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are unable
to remedy the problem by yourself, please contact Hilti Service.
Trouble or fault
The power tool
doesn't run.
The power tool
doesn't run.
Running speed sud-
denly drops consid-
erably.
24 English
Printed: 27.09.2016 | Doc-Nr: PUB / 5293888 / 000 / 01
All manuals and user guides at all-guides.com
Possible cause
The battery is not fully
inserted.
Low battery.
The battery is not fully
inserted.
Low battery.
Low battery.
Action to be taken
▶ Push the battery in
until it engages with
an audible double
click.
▶ Change the battery
and charge the empty
battery.
▶ Push the battery in
until it engages with
an audible double
click.
▶ Change the battery
and charge the empty
battery.
▶ Change the battery
and charge the empty
battery.