Protecting The Environment; Rechargeable Battery Pack - DeWalt DCR017 Traducido De Las Instrucciones Originales

EnglIsh
1. Press the Menu button .
5
2. Use the arrow buttons 3 to scroll to Clock Adjust and press
the Enter/Display button 7
3. Scroll to Sync Time Now press the Enter/Display button to
select. This automatically synchronises clock with national
time signals.
to adjust the clock Manually:
(FM and DAB mode)
1. Press the Menu button 5 .
2. Use the arrow buttons 3 to scroll to Clock Adjust on the LCD
display and press the Enter/Display button
3. Scroll to Date & Time and press the Enter/Display button
4. Set the date and time using left and right arrow buttons
5. Once the desired time is set press the Enter/Display
button to commit.
Other Clock Adjust menu options:
• Time format: Select a 12h or 24h time display format
• Date format: Select the date display format, MM/DD/YYYY,
YYYY/MM/DD or DD/MM/YYYY.
To Adjust the EQ
Sound can be adjusted by changing the equalization of the bass
or treble of the radio.
1. Press the Menu button
5
arrow buttons 3 to select Sound EQ. Select by pressing the
Enter/Display button 7 .
2. Press the right arrow button to increase the bass or the left
arrow button to decrease it.
3. Once desired adjustment is achieved, press the Enter/
Display button 7 .
4. Repeat steps 2 and 3 for treble adjustment.
Important Radio Notes
1. The radio will run up to 8 hours on a fully charged 4.0 amp
hour battery. Using batteries of lower voltage or capacity
will result in less run time.
2. Reception will vary depending on location and strength of
radio signal.
3. Certain generators may cause background noise.
4. To use the auxiliary port 11
CD or iPod®*/MP3 player into the port (Fig. A). The sound
from the external source plays through the speakers of the
DCR017.
5. The USB power output port
powering low power devices such as mobile phones, CD
and MP3 players.
* iPod is a registered trademark of Apple Inc.
MAINTENANCE
Your D WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
24
.
.
7
7
and scroll using the left or right
, plug the output jack from a
16 is a connection port for
Service Notes
This product is not user serviceable. There are no user
serviceable parts inside the charger/radio. Servicing at an
authorised service centre is required to avoid damage to static
sensitive internal components.
Cleaning

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the charger/radio.
These chemicals may weaken the materials used in these
7 .
parts. Use a cloth dampened only with water and mild
3 . soap. Never let any liquid get inside the charger/radio;
never immerse any part of the charger/radio into a liquid.
Optional Accessories

WARNING: Since accessories, other than those offered
by D WALT, have not been tested with this product,
e
use of such accessories with this charger/radio could
be hazardous. To reduce the risk of injury, only D
recommended accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the Environment

Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.

Rechargeable Battery Pack

This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the charger/radio.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
WALT
e