GPO MEMPHISRED Manual De Uso página 9

OPERATING THE TURNTABLE
Before use, please make sure to: Lift the dust cover.
Release the tonearm clamp and remove the stylus protector.
Listening to records
1. Set the FUNCTION button (22) to the PHONO position.
2. Place a record on the turntable, over the central spindle. Place the
EP adapter over the central spindle when playing 17cm EP records.
3. Set the Speed selector (5) to 33, 45 or 78 rpm depending on the
record.
4. Release the tonearm clamp and remove the stylus protector.
5. Lift the tonearm from the tonearm rest by using the Lift lever.
6. Place the tonearm on the desired position of the record.
7. Gently lower the tonearm onto the record to start playing.
8. When the record is finished the tonearm will automatically stop. Lift
the tonearm from the record and put it back on the rest.
9. To stop manually, lift the tonearm from the record and return
it to the rest.
10. Set the Auto-stop (ON/OFF) selector to the ON position to use the
auto-stop function.
In the ON position, 33 rpm records will automatically stop when the end
of the record is reached.
45 and 78 rpm records can play the whole song when the auto-stop
function is OFF.
Note: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the tonearm clamp
could result in damage to the tonearm.
Replace the protective cap on the stylus when not in use.
GPO_Memphis_user_Manual EU - Oct 2020_v1.indd 9 GPO_Memphis_user_Manual EU - Oct 2020_v1.indd 9
9
04/11/2020 14:22 04/11/2020 14:22