Technical Data; Important - Blanco ZENOS-S Instrucciones De Montaje Y Mantenimiento

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOZENOS-S HD / HD
Lever
1 1
2 2 Fixing Screw
3 3 Screw cover
Cartridge retaining ring
4 4
Plastic ring
5
Tension ring cartridge
6 5
7 6 Cartridge
8 7 Body
Spout retaining screw
9
Adaptor
10
Seal
11
12 O-ring set shower
13 Flow Straighter
14 Shower head + Spray hose
O-ring body
15
Bush
16 8
17 9 Base Ring
18 10 Fixing kit
19 11 Flexi-hose
Flow Straighter
12
O-ring set body
13
Plastic ring
14
20 Seal non-return valve
21 Non-return valve
Non return valve housing
22
Spray hose seal bottom
23
Seal flexi-hose
24 15
25 Hose return weight
26 16 Stabilisation triangle

Technical data

Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure
• Min. 0.5 bar • Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong
Illustrations
1
2
5
6
7
further illustrations on the back fold-out flap
12
15
When tap has been fitted check:
tightness, movement, full jet of water
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
16
19
21
25

Important

in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
Example
recommended
th is B L A N C O
Installation
Tap hole: 35 mm
- 4 Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Flush the pipe work to remove foreign debris
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
Recommendation: fit dirt filter
- Connect flexi hoses
11
- Spray hose guide
14
Rinse perlator/ jet regulator
Care
- Use soft (microfibre) cloth and mild cleaning
18
agent
- 20 Take care with hard objects
- Using the hose spray
24
- Cleaning the perlator/ jet regulator with
27
vinegar
n s o n b u y in g
C o n g ra tu la ti o
e y o u
ta p – w e h o p
w it h it !
a re d e li g h te d
2