Technical Data - Blanco TERA ND Información Técnica

SPARE PARTS
MOD. BLANCOTERA ND
1) Aerator holder ring
2) Antisplash
3) Complete spout
4) Handle indice
5) Screw
6) Handle
7) Valve cover
8) Valve
9) Body
10) Flexible pipes
11) Plastic base for sink
12) Fixing kit (A-B-C-D-E)
13) Adhesive washer
14) Flow reducer
Note : When you fire the heating boiler the water volume in the boiler itself increases. The
exceeding water must drip from the mixer spout; this is absolutely normal and necessary. The
heating boiler must not be under pressure. Do not use aerators or connections which reduce the
water flow of sink mixer, as this could damage the boiler. Do not use aerators or antisplashes
different from the one delivered with the mixer.
AFTERCARE INSTRUCTIONS
Use only water an neutral soap detergents to clean the mixer wiping with a sponge or a soft cloth.
Never use alcohol solvents, solid or liquid detergents containing cording substances or acid,
antilimestone detergents, cloths with synthetic fibres, abrasive sponges or wire buffers that may
cause irreversible damages on the treated surface. Such damages are not covered by the
guarantee.
Caution!
Water at high temperatures leaves a lime deposit, which can obstruct the water flow (in the mixer
and/or in the boiler) and put the boiler under pressure. The lime deposit in the mixer and in the
boiler must be removed at regular intervals by the installer.
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
Guarantee
Guarantee claims must be accompanied by the invoice showing the dates of purchase or
installation.
We reserve the right to introduce technical changes without notice.
7

TECHNICAL DATA

Application
- Low pressure storage heaters of hot water
(open circuit)
Functional characteristics
Flow pressure
- Min.
- Recommended
- Max.
The flow reducer (pos 14) must always be
installed.
Temperature
- Recommended (energy saving) 60°
ENGLISH
0,5 Bar
1,0-5,0 Bar
5,0 Bar