Safety-Relevant Information - Blanco drink.soda EVOL-S Pro Manual De Instrucciones

Safety-relevant information

Hot water corner valve
The system may only be connected to a water inlet with constant drinking water quality in
accordance with local requirements and with continuous fl ow pressure. Do not use osmosis
water or highly fi ltered water in the system. This can lead to problems with the fi ll level control.
Cold water corner valve
≤ 70°C
≤ 158°F
≤ 10 bar
≤ 145 psi
+ 5 - 30°C
+ 40 - 86°F
14.5 psi ≤
Cleanliness during assembly
The BLANCO drink.soda EVOL-S Pro system
transports, doses, cools and refi nes one of our
most valuable provisions: drinking water.
Special attention should therefore be paid
to cleanliness and hygiene during assembly.
Particularly in the case of water-bearing parts
(seals, tube connections, threads, etc.), it is
essential to avoid contamination during the
assembly process. We recommend thorough
hand washing and avoiding skin contact with
surfaces that will later come into contact with
drinking water.
Safety precautions
System installation, commissioning and
maintenance may only be carried out by
trained technicians.
Only the manufacturer may carry out repairs
to the system.
Important: Live parts within the refrigeration
unit. Do not open the refrigeration unit!
Cables and tubes must be laid in such a way
that they cannot be damaged. Damaged parts
must be replaced by a professional.
When using a waste system, it must be
explicitly ensured that cables and tubes
cannot be trapped or damaged.
1 bar ≤ ≤ 10 bar
≤ 145 psi
EN
25