Blanco drink.soda EVOL-S Pro Manual De Instrucciones página 32

EN
Assembly
Before assembling the refrigeration unit, the sink with mixer tap and drain set
should always be assembled on the worktop with the worktop positioned on the
base cabinet. This defi nes the installation space (projecting edges of the basin)
for the refrigeration unit.
For assembly with a BLANCO UNIT, the refrigeration unit is assembled after the
waste separation system (BLANCO SELECT) has been fi tted in the base cabinet.
1
35 mm
Ø
2
3
32
Install the mixer tap in the tap hole (35 mm dia.).
Fasten the fi tting with the assembly set.
Rinse both corner valves.