MACHEREY-NAGEL NANOCOLOR VARIO C2 Manual página 45

12.1.3 Programming the temperature
Press to access the selection of programmed temperatures(Figure 8).
Figure 8: Programming the temperature
Select a free memory location ( ) and enter the desired temperature in the range 40 °C–
160 °C (Figure 9). Confirm the temperature with .
Figure 9: Setting the temperature
Temperatures programmed by the user can be deleted or edited in the same way. Prepro‑
grammed temperatures cannot be changed.
Manual heating block NANOCOLOR VARIO C2 / VARIO 4 EN, 08.2021
45
®