Dispose of chemicals, waste and used cuvettes according to national, regional and
local regulations.
When a program is finished, a signal tone is emitted (see chapter Signal tone, page 48) and
the digestion is finished. "END" appears in the display. Open the protective hoods and remove
the vials from the heating block (Figure 17).
After pressing one of the keys
Figure 17: Removing the cuvettes from the heating block
The internal fan of the device runs parallel to the sample digestion and, if necessary,
even beyond.
Manual heating block NANOCOLOR
52
WARNING
,
or
the last selected program is recalled.
NOTICE
VARIO C2 / VARIO 4 EN, 08.2021
®