MACHEREY-NAGEL NANOCOLOR VARIO C2 Manual página 46

12.1.4 Programming heating times
Press to access the heating time settings (Figure 10).
Figure 10: Programming the heating time
Select a free memory location ( ) and enter the desired heating time in the range
0h:01 min‑9h:59 min (Figure 11). Confirm the heating time entry with .
Figure 11: Editing heating times
Heating times programmed by the user can be deleted or edited in the same way. Prepro‑
grammed heating times cannot be changed.
Manual heating block NANOCOLOR VARIO C2 / VARIO 4 EN, 08.2021
46
®