English
Technical Data
Operating pressure:
max. 0,6 MPa
Recommended operating pressure: 0,1 – 0,4 MPa
(1 MPa = 10 bars = 147 PSI)
Recommended hot water temp.:
max. 60° C
Assembly
The mesh washer must be insert to protect the
overhead shower against incoming dirt by
pipework. Incoming dirt leads to defects or/and
can damage parts of the shower; such caused
faults voids all liability and guarantee claims.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
10