SONOFF TECHNOLOGIES CO., LTD.
RM433 Introduction
Buttons
Functions
On
Off
Short press for the low brightness, long press to turn down the
brightness
Short press for the medium brightness, long press to turn down
the brightness
Short press for the higher brightness, long press to turn up the
brightness
Short press for the high brightness, long press to turn up the
brightness
Long press for 5s until you hear "Beep Beep" and release, then
the remote controller is cleared successfully.
A f t e r c l e a r i n g c o d e i s c o m p l e t e d , i f y o u n e e d t o u s e , s h o r t
press any button within 5s after powering on again and you
will hear"Beep", which indicates the remote controller is paired
successfully.
Long press for 5s until the connected light enters the breathing
mode, which indicates the device enters quick pairing mode (Touch),
then you can add the light on eWeLink APP. In quick pairing mode,
you can short press any button on the remote controller to exit this
mode.
7
English