Dip Switch - Carrier 40VCW217FQEE Manual De Instalación Y Propietario

Operation
heating function. The controller will be turned on, and "HH" flashes in the middle area to indicate that the forced
heating function is turned on.
(3) All keys work except ON/OFF key in the forced cooling/heating mode.
(4) When the forced cooling/heating is set, press ON/OFF key to exit this function.
Difference between the function of the Master wired controller and Slave wired controller
Comparison item
Function

Dip switch

DIP switch 2 ON/ OFF
station
ON
Sw1
OFF
ON
Sw2
OFF
ON
Sw3
OFF
ON
Sw4
OFF
ON
Sw5
OFF
ON
Sw6
OFF
ON
Sw7
OFF
ON
Sw8
OFF
DIP switch 1 ON/ OFF
station
ON
Sw1
OFF
ON
Sw2
OFF
ON
Sw3
OFF
ON
Sw4
OFF
Master wired controller
All functions are available
Doesn't/Hide display ambient temperature
Collect ambient temperature from PCB of indoor unit
Collect ambient temperature from wired controller
Non-volatile memory does not function
Model with Up/Down and Left/Right swing
Doesn't/Hide display ambient humidity
Slave wired controller
Only the following operations can be performed:
(1) ON/OFF, Mode, Fan speed, Temperature setting, Swing, Energy
saving, Clock function.
(2) Parameter inquiry and malfunction inquiry
Function
Slave wired controller
Master wired controller
Display ambient temperature
Non-volatile memory functions
Old protocol
Self-adaption
Reserved
Reserved
Model with Up/Down swing
Fresh Air unit
Common unit
Function
Reserved
Reserved
Display ambient humidity
Reserved
Reserved
Reserved
Reserved
12
Default
setting
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Default
setting
OFF
OFF
OFF
OFF