Dip Switch - Carrier 40VCW117FQEE Manual De Instalación Y Propietario

Dip Switch

Dip switch definition
Dip Switch SWl\
SWl ON
Swl Slave wired controller
Swl-2 Room temperature display on
Swl-3 Room temperature collected from indoor unit
Swl-4 System remains off after power loss
Swl-5 Old protocol (models develioed before Ayg, 2013
Swl-6 Backlight always on
Swl-7 Reserved
Dip Switch SWl 2
SW2 ON
Swl Slave wired controller
Sw2-1 Mode Lock
No button confirmation tone.
(Tone will still be audible when
command is sent by wireless remote.)
Sw2-3 Reserved
Sw2-4 Reserved
Initialization
When the mini-split system is powered on, 88.8 will flash between the Room Temperature display and the Set Tem-
perature display, until communication is established with the indoor unit.
Audible Alert
Press to power ON or power OFF the control. A tone will be heard with every button press or when a command
is received by a remote control. If a conflicting command is received, then the tone will beep 3 times.
OFF
Master wired controller
Room temperature display off
Room temperature collected from
controller
Auto restart after power loss
New protocol
Backlight 15 second auto time out
Reserved
OFF
Master wired controller
Normal
Tone on
Reserved
Reserved
3
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Default
OFF
Normal
OFF
OFF
OFF