Dash Disassembly; Kit Preparation - Metra 99-7010 Instrucciones De Instalación

DASH DISASSEMBLY

1. Unclip and remove the trim panel
including the radio A/C vents. (Figure A)
2. Remove (4) Phillips screws securing radio
chassis to dash to remove. (Figure B)
3. Unclip and remove the A/C vents from
the factory radio trim panel. (Figure C)
4. Unclip and remove the hazard switch
from the factory radio trim panel.
(Figure D)
Continue to Kit Preparation
(Figure A)
2
(Figure B)
(Figure C)
REAR VIEW
(Figure D)

KIT PREPARATION

To the 99-7010 radio housing:
1. Clip the A/C vents into the housing.
(Figure A)
2. Clip the hazard switch into the housing.
(Figure B)
3. Attach the (5) plastic clips provided onto
the housing.
Continue to Kit Assembly
(Figure A)
(Figure B)
|
1.800.221.0932 MetraOnline.com